EMPLOYMENT OPPORTUNITIES
Jobs and Benefits:
- Careers in welding, fabrication, paint and assembly
- Project and work variety
- Corporate dedication to a safe and efficient work place
- Competitive wages
- Medical, dental and vision benefits, along with life insurance and disability plans
- 401K options
- PTO upon hire
- Paid holidays
- Sign on Bonus
- Referral Bonus

Available Positions
Job Features
Job Category | Machine Operator |
- Drive company trucks to make deliveries in various locations and states
- Complete and maintain records as required by the company and government regulations
- Load or assist in loading trailer with equipment
- Unload or assist in unloading equipment
- Able to perform all responsibilities safely and efficiently
- Clean and conduct proper maintenance on equipment
- High school diploma or general education degree
- CDL required and valid driver’s license
- 2+ years’ experience preferred
- Must meet DOT and company requirements
- Able to lift/carry up to 75 lbs.
- Able to work additional hours to meet business needs
- Comply with all safety rules, policies, and procedures
- Report any unsafe practices and/or conditions to their supervisor
- Drive company trucks to make deliveries in various locations and states
- Complete and maintain records as required by the company and government regulations
- Load or assist in loading trailer with equipment
- Unload or assist in unloading equipment
- Able to perform all responsibilities safely and efficiently
- Clean and conduct proper maintenance on equipment
- High school diploma or general education degree
- CDL required and valid driver’s license
- 2+ years’ experience preferred
- Must meet DOT and company requirements
- Able to lift/carry up to 75 lbs.
- Able to work additional hours to meet business needs
- Comply with all safety rules, policies, and procedures
- Report any unsafe practices and/or conditions to their supervisor
- Follow required safety and work procedures including standards, blueprints and/or wiring diagrams
- Utilize hand tools and pneumatic tools to assemble, wire and install components and assemblies
- Assemble and package parts, hardware and materials to complete products or assemblies at a level of output that minimizes production delays
- Utilize quality checks to ensure all systems are set for correct operational sequencing and to meet product standards
- Maintain a clean and orderly work area
- May work at different workstations as production needs require, or shifts from one station to another, during the assembly process
- Other responsibilities as assigned
- Comply with all safety rules, policies, and procedures
- Report any unsafe practices and/or conditions to their supervisor
- Wear required personal protective equipment (PPE) and report any defective PPE
- Participation in the site safety and health program
- Safety, quality, accuracy, timeliness, reliability, and thoroughness of work performed
- Gains the trust and respect of the shift supervisor, co-workers, and other employees
- Develops working knowledge of the production environment and has ability to respond to change
- Work to Continuously Improve the operations of the department through Lean activities and Improvement suggestions
- High school diploma or general education degree
- Previous manufacturing experience is preferred
- Position requires good mathematical ability
- Work in a manufacturing plant environment with the risk of injury
- Safety equipment must be worn when working with equipment in the shop
- Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 75 pounds
Job Features
Job Category | Driver |
- Set-up, adjust, program, calibrate and perform preventative maintenance on fabrication equipment
- Fabricate products to specification, from job order and document production data at a level of output that minimizes productions delays
- Perform quality checks to ensure all systems are set for correct operational sequencing and to meet product standards
- Maintain a clean and orderly work area to plant standards
- Knowledge of how to read measuring instruments (calipers, protractor, tape measure, steel ruler), read blueprints and operate hand tools
- Ability to read, write and use basic math skills includes factions and decimals
- Strong mechanical aptitude with the ability to follow precise instructions
- Will be required to cross-train as back-up in other areas of manufacturing plant
- Required to perform proper entry into the ERP system
- Other job-related duties may be necessary to carry out the responsibilities of this position
- Safety, Quality, Accuracy, Timeliness, Reliability, Productivity, and Craftsmanship of work performed
- Gains the trust and respect of the supervisor, co-workers, and other employees
- Develops working knowledge of the production environment and has ability to respond to change
- Work to Continuously Improve the operations of the Department through Lean activities and Improvement suggestions
- Prefer at least 6 months of experience working in a manufacturing facility
- Position requires good mathematical ability and the ability to read and interpret blueprints
- Positions requires the ability to operate precision measuring devices such as calipers, micrometers, protractors, and tape measure
- Work in a production environment
- Steel toed boots and safety glasses must be always worn, ear protection and face shield are available
- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of job
- Position is very active and requires standing, walking, bending, kneeling, stooping, crouching
- Employee must occasionally lift, push, pull or move items over 50 pounds
Job Features
Job Category | Machine Operator |
· MIG welding including the following:
o Create quality welds according to blueprints (weld symbols)
o Inspect welds for accuracy & quality
o Prepare product to be welded by grinding, drilling, milling, tapping, and cutting steel
o Change welding wire as needed
o Change has tanks as needed
· Responsible for the proper packaging, identifying, and moving of all finished products to the proper location
· Ensure all equipment is properly set-up and used in safe manner and that all safety devices are in use
· Perform first piece inspections as well as all subsequent inspections as required
· Monitor equipment and request maintenance when required
· Perform simple maintenance and repair as required
Other Duties and Responsibilities:· Will be required to cross-train as back-up in other areas of manufacturing plant
· Required to have proper and accurate entry into the time and attendance system
· Other job-related duties may be necessary to carry out the responsibilities of this position
Performance Expectations:· Safety, Quality, Accuracy, Timeliness, Reliability and Thoroughness of work performed
· Gains the trust and respect of the shift supervisor, co-workers, and other employees
· Develops working knowledge of the production environment and has ability to respond to change
· Work to Continuously Improve the operations of the Department through Lean activities and Improvement suggestions
Knowledge, Skills, and Abilities:· Prefer at least 6 months of experience working with MIG welding
· Position requires good mathematical ability and the ability to read and interpret blueprints
· Positions requires the ability to operate precision measuring devices such as calipers, micrometers, protractors, and tape measure
Working Conditions:· Work in a production environment with the risk of injury
· Safety equipment must be worn when working with equipment in the shop
· Bending, lifting to 25 pounds, and pushing up to 70 pounds is required
Apply by clicking here and filling out our application.Job Features
Job Category | Welding Department |
· Set-up, adjust, program, calibrate and perform preventative maintenance on fabrication equipment
· Fabricate materials to specification, from job order and document production data at a level of output that minimizes productions delays
· Utilize quality checks to ensure all systems are set for correct operational sequencing and to meet product standards
· Maintain a clean and orderly work area to 5S Standards
· Understanding of how to use measuring instruments (calipers, protractor, tape measure, steel ruler), read blueprints and operate hand grinder and other hand tools
Other Duties and Responsibilities:· Ability to read, write and use basic math skills plus factions and decimals
· Strong mechanical aptitude with the ability to follow precise instructions
· Will be required to cross-train as back-up in other areas of manufacturing plant
· Required to have proper and accurate entry into the time and attendance system
· Other job-related duties may be necessary to carry out the responsibilities of this position
Performance Expectations:· Safety, Quality, Accuracy, Timeliness, Reliability and Thoroughness of work performed
· Gains the trust and respect of the shift supervisor, co-workers, and other employees
· Develops working knowledge of the production environment and has ability to respond to change
· Work to Continuously Improve the operations of the Department through Lean activities and Improvement suggestions
Knowledge, Skills, and Abilities:· Prefer at least 6 months of experience working with MIG welding
· Position requires good mathematical ability and the ability to read and interpret blueprints
· Positions requires the ability to operate precision measuring devices such as calipers, micrometers, protractors, and tape measure
Working Conditions:· Work in a production environment with the risk of injury
· Safety equipment must be worn when working with equipment in the shop
· Physical demands occasionally required to site; climb and balance; and stoop, kneel, crouch or crawl and frequently required to use hands and fingers to handle or feel; and reach with hands and arms.
· Stand for up to 12 hours per day and occasionally life up to 50 pounds, and pushing up to 75 pounds is required
Apply by clicking here and filling out our application.Job Features
Job Category | Machine Operator |
· Follow required safety and work procedures including standards, blueprints and/or wiring diagrams
· Utilize hand tools and pneumatic tools to assemble, wire and install components and assemblies
· Assemble and package parts, hardware and materials to complete products or assemblies at a level of output that minimizes production delays
· Utilize quality checks to ensure all systems are set for correct operational sequencing and to meet product standards
· Maintain a clean and orderly work area
· May work at different workstations as production needs require, or shifts from one station to another, during the assembly process
· Other responsibilities as assigned
Safety Responsibilities:· Comply with all safety rules, policies, and procedures
· Report any unsafe practices and/or conditions to their supervisor
· Wear required personal protective equipment (PPE) and report any defective PPE
· Participation in the site Safety and Health Program
Performance Expectations:· Safety, Quality, Accuracy, Timeliness, Reliability and Thoroughness of work performed
· Gains the trust and respect of the shift supervisor, co-workers, and other employees
· Develops working knowledge of the production environment and has ability to respond to change
· Work to Continuously Improve the operations of the Department through Lean activities and Improvement suggestions
Knowledge, Skills, and Abilities:· High school diploma or General education degree
· Previous manufacturing experience is preferred
· Position requires good mathematical ability
Working Conditions:· Work in a manufacturing plant environment with the risk of injury
· Safety equipment must be worn when working with equipment in the shop
· Regularly lift and/or move up to 10 pounds, frequently life and/or move up to 25 pounds, and occasionally life and/or move up to 75 pounds
Apply by clicking here and filling out our application.Job Features
Job Category | Assembly Department |